1.2W Infrared Laser Module For Creality Falcon A1C
Mark Metal with Precision — Infrared Laser Module for Creality Falcon A1C
The 1.2W Infrared Laser Module (1064 nm) is purpose-built for the Creality Falcon A1C (Basic & AI Camera versions), unlocking a new class of materials that standard blue-light diode lasers cannot touch — including bare metals, anodized aluminum, stainless steel, titanium, brass, copper, and coated surfaces.
Outstanding Metal Performance
Unlike visible-wavelength lasers, the 1064 nm infrared beam interacts directly with metal surfaces, enabling fine surface marking and light engraving across a wide range of materials:
| Material | Suitability | What to Expect |
|---|---|---|
| Black/dark anodized aluminum | ★★★★★ | Excellent contrast, very easy to mark |
| Coated/painted aluminum | ★★★★★ | Removes or alters coating for high-contrast results |
| 304 / 316 stainless steel | ★★★★☆ | Clean direct marking; darker or light surface marks |
| Bare aluminum | ★★★★☆ | Works well; less contrast than anodized |
| Titanium | ★★★★☆ | Good marking potential |
| Brass | ★★★☆☆ | Works; settings require more care |
| Copper | ★★★☆☆ | Possible; reflective surface needs careful tuning |
| Gold / Silver | ★★★☆☆ | Can mark; test carefully on valuable pieces |
Best Starting Materials
For the most impressive and consistent results, we recommend starting with:
- Black anodized 6061 aluminum — the IR beam alters the anodized layer to reveal a sharp, high-contrast mark underneath
- Brushed 304 stainless steel — demonstrates true bare-metal marking capability
- Powder-coated or painted aluminum — showcases coating removal with clean, defined edges
Key Features
- 1064 nm infrared wavelength — the industry-standard wavelength for metal marking
- 1.2W output power — ideal for fine surface marking and light engraving; not deep fiber-laser engraving
- Plug-and-play compatibility — designed exclusively for Creality Falcon A1C (Basic & AI Camera editions)
- Compact module design — easy to swap without tools
Compatibility
- Creality Falcon A1C (Basic)
- Creality Falcon A1C (AI Camera)
⚠️ Safety Notice
The 1064 nm infrared beam is completely invisible to the naked eye. Always operate within an enclosure with proper interlocks and use wavelength-appropriate IR laser safety eyewear. Use adequate fume extraction when working with coated, painted, or powder-coated materials. Do not engrave unknown coatings without first identifying their composition.
Mark Metal with Precision — Infrared Laser Module for Creality Falcon A1C
The 1.2W Infrared Laser Module (1064 nm) is purpose-built for the Creality Falcon A1C (Basic & AI Camera versions), unlocking a new class of materials that standard blue-light diode lasers cannot touch — including bare metals, anodized aluminum, stainless steel, titanium, brass, copper, and coated surfaces.
Outstanding Metal Performance
Unlike visible-wavelength lasers, the 1064 nm infrared beam interacts directly with metal surfaces, enabling fine surface marking and light engraving across a wide range of materials:
| Material | Suitability | What to Expect |
|---|---|---|
| Black/dark anodized aluminum | ★★★★★ | Excellent contrast, very easy to mark |
| Coated/painted aluminum | ★★★★★ | Removes or alters coating for high-contrast results |
| 304 / 316 stainless steel | ★★★★☆ | Clean direct marking; darker or light surface marks |
| Bare aluminum | ★★★★☆ | Works well; less contrast than anodized |
| Titanium | ★★★★☆ | Good marking potential |
| Brass | ★★★☆☆ | Works; settings require more care |
| Copper | ★★★☆☆ | Possible; reflective surface needs careful tuning |
| Gold / Silver | ★★★☆☆ | Can mark; test carefully on valuable pieces |
Best Starting Materials
For the most impressive and consistent results, we recommend starting with:
- Black anodized 6061 aluminum — the IR beam alters the anodized layer to reveal a sharp, high-contrast mark underneath
- Brushed 304 stainless steel — demonstrates true bare-metal marking capability
- Powder-coated or painted aluminum — showcases coating removal with clean, defined edges
Key Features
- 1064 nm infrared wavelength — the industry-standard wavelength for metal marking
- 1.2W output power — ideal for fine surface marking and light engraving; not deep fiber-laser engraving
- Plug-and-play compatibility — designed exclusively for Creality Falcon A1C (Basic & AI Camera editions)
- Compact module design — easy to swap without tools
Compatibility
- Creality Falcon A1C (Basic)
- Creality Falcon A1C (AI Camera)
⚠️ Safety Notice
The 1064 nm infrared beam is completely invisible to the naked eye. Always operate within an enclosure with proper interlocks and use wavelength-appropriate IR laser safety eyewear. Use adequate fume extraction when working with coated, painted, or powder-coated materials. Do not engrave unknown coatings without first identifying their composition.
